BPCWW - P1629, POLYOXYETHYLENESORBITAN MONOSTEARATE
- MSDS: BPCWW
- Manufacturer: SIGMA CHEMICAL CO
- Product Name: P1629, POLYOXYETHYLENESORBITAN MONOSTEARATE
- National Stock Number: 6810-00N028568
Product Identification
Product ID:P1629, POLYOXYETHYLENESORBITAN MONOSTEARATE
MSDS Date:01/27/1992
FSC:6810
NIIN:00N028568
MSDS Number: BPCWW
Responsible Party
US
Emergency Phone: 314-771-5765
Info Phone: 800-325-3030
Cage: 0DK69
Contractor
Telephone: 314-771-5765
Cage: 0DK69
Ingredients
SORBITAN, MONOSTEARATE POLYOXYETHYLENE DERIV.;
CAS: 9005-67-8
RTECS: WG2934000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY BE HARMFUL BY INHALATION,
INGESTION, OR SKIN ABSORPTION. MAY CAUSE EYE IRRITATION. MAY CAUSE
SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IMMED FLUSH EYES WITH COPIOUS AMOUNTS OF WATER FOR AT
LEAST 15 MIN. SKIN: IMMED WASH SKIN WITH SOAP AND COPIOUS AMOUNTS
OF WATER. WASH CONTAMINATED CLOTHING BEFORE REUSE. INHAL: REMOVE TO
FRESH AIR. IF NOT BREATHING GIVE ARTF RESP. IF BREATHING IS
DIFFICULT, GIVE O2. INGEST: WASH OUT MOUTH WITH WATER PROVIDED
PERSON IS CONSCIOUS. CALL A PHYSICIAN.
Fire Fighting
Flash Point:>230F,>110C
Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL POWDER, OR
APPROPRIATE FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT TO PREVENT CONTACT WITH SKIN AND EYES.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WEAR NIOSH/MSHA APPROVED RESP, CHEMICAL SAFETY
GOGGLES, RUBBER BOOTS AND HEAVY RUBBER GLOVES. ABSORB ON SAND OR
VERMICULITE AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL. VENTILATE
AREA AND WASH SPILL S ITE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP TIGHTLY CLOSED. STORE IN A COOL
DRY PLACE.
Other Precautions:AVOID INHALATION. AVOID CONTACT WITH EYES, SKIN AND
CLOTHING. AVOID PROLONGED OR REPEATED EXPOSURE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL EXHAUST REQUIRED.
Protective Gloves:COMPATIBLE CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER AND EYE BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. WASH
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:1.044
Appearance and Odor:PALE YELLOW GREASE
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS BASES, HEAVY METAL SALTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE,
CARBON DIOXIDE.
Disposal
Waste Disposal Methods:DISSOLVE OR MIX THE MATL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN
AFTERBURNER AND SCRUBBER. OBSERVE ALL FEDERAL, STATE AND LOCAL
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.